| 2 3074 01 Rollix Slewing Ring Bearings | Basic dynamic load rating (C):205 kN; Bearing number:HJ-648032; Outer Diameter (mm):127; Width (mm):50,8; Size (mm):101.6x127x50.8; D:127 mm; (Grease) Lubrication Speed:4625 r/min; Weight:1,541 Kg; Basic static load rating (C0):436 kN; Bore Diameter (mm):101,6; C:50,8 mm; r5 min.:2,54 mm; Fw:101,6 mm; |
| 66158L Franke Slewing Ring Bearings | Outer Diameter (mm):13; Bearing number:S695W5; Width (mm):5; d:5 mm; Basic dynamic load rating (C):1,077 kN; Size (mm):5x13x5; (Grease) Lubrication Speed:43000 r/min; Basic static load rating (C0):0,432 kN; D:13 mm; Bore Diameter (mm):5; B:5 mm; C:5 mm; |
| 75071A Franke Slewing Ring Bearings | R:7.577 in; E:8.781 in; No. of Tangs:19; S:0.715 in; Q:0.146 in; T:0.645 in; B:9.875 in; X:7.316 in; Weight:1.050 lb; V:0.312 in; |
| 7 1140 13 Rollix Slewing Ring Bearings | Dp:345 mm; D4:360 mm; Thread D11:Tr320x5; i:18 mm; Tapped Hole Threads:M10x1.5; Weight:13.1 Kg; Suitable Lockplate No.:MS3164; T:12 mm; Bn:42 mm; D3:400 mm; s:24 mm; |
| 66176L Franke Slewing Ring Bearings | Bore Diameter (mm):152,4; Size (mm):152.4x307.975x88.9; Outer Diameter (mm):307,975; d:152,4 mm; a:26,4 mm; D:307,975 mm; B:93,662 mm; Bearing number:HH234048/10; Width (mm):88,9; C:66,675 mm; T:88,9 mm; |
| 75037A Franke Slewing Ring Bearings | Bore Diameter (mm):10; d:10 mm; B:8 mm; Outer Diameter (mm):26; D:26 mm; Size (mm):10x26x8; Bearing number:6000; Width (mm):8; |
| 73015L Franke Slewing Ring Bearings | Width (mm):4; Cage Material:Steel; Size (mm):80x105x4; Noun:Roller Assembly; h(mm):5.75; Washer designation Shaft piloted:WS.81116; d:80 mm; Bore 2:3.15 Inch | 80 Milli; Harmonized Tariff Code:8482.99.25.40; ra(max):0.6; (Refer.)Mass(kg):0.1580; Dc1:80; Weight / Kilogram:0.06; T:4 mm; Washer designation:AS80105; Outside Diameter:4.134 Inch | 105 Mil; Rolling Element:Needle Roller Bearin; D,d1:105; |
| 66174L Franke Slewing Ring Bearings | C - Double Cup Width:1.2500 in; Y1 - ISO Factor5:1.95; Cg - Geometry Factor8:0.0601; Da - Cup Frontface Backing Diameter:2.40 in; r - Cup Frontface To Clear Radius2:0.02 in; G1 - Heat Generation Factor (Roller-Raceway)7:14.8; Series:13800; Design Units:Imperial; D:2.5000 in; K - Factor3:1.69; e - ISO Factor4:0.35; Y - ISO Factor1:1.73; G2 - Heat Generation Factor (Rib-Roller End):23.3; Y2 - ISO Factor6:2.9; |