| No. | Brand | h | H | G | A | C | a | L | w |
| NTB7095 | IKO | - | - | - | - | - | - | - | - |
| CFE16BUUR | IKO | 87.313 mm | - | - | - | - | - | - | - |
| AZK20026520 | IKO | - | - | - | - | - | - | - | - |
| CR10R | IKO | - | - | M 42x2 | - | - | - | - | - |
| CF20VBR | IKO | - | - | - | - | - | - | - | - |
| BA68ZOHX | IKO | - | - | - | - | - | - | - | - |
| BHAM68 | IKO | - | - | - | - | - | - | - | - |
| IRT1516 | IKO | - | - | - | - | - | - | - | - |
| IRT5530 | IKO | - | - | - | - | - | - | - | - |
| TLAM1012 | IKO | - | - | - | - | - | - | - | - |
| RNA4915 | IKO | 38.1 mm | 192.484 mm | - | - | - | - | - | - |
| RNAF8510530 | IKO | - | - | - | - | - | - | - | - |
| CF10-1BUUM | IKO | - | - | - | - | - | - | - | - |
| IRB1420 | IKO | - | - | - | - | - | - | - | - |
| YB2414 | IKO | - | - | - | - | - | - | - | - |
| RNA4844 | IKO | - | - | - | - | - | - | - | - |
| CR18VR | IKO | - | - | - | - | - | - | - | - |
| GS3552 | IKO | - | - | - | - | - | - | - | - |
| TLAM4012 | IKO | 46.038 mm | - | - | - | - | - | - | - |
| TAF708525 | IKO | - | - | - | - | - | - | - | - |
| LHS16L | IKO | - | - | - | - | - | - | - | - |
| IRT6050 | IKO | - | - | - | - | 55 mm | 58.002 mm | - | - |
| LRT440490160 | IKO | 20 mm | - | Tr 670x6 | - | - | - | - | - |
| NTB120155 | IKO | - | - | - | - | - | - | - | - |
| 1.772 Inch | 45 Millimeter x 1.969 Inch | 50 Millimeter x 0.807 Inch | 20.5 Millimeter IKO IRT4520 Needle Non Thrust Roller Bearings | ba:50.006 mm; Eye bolt:2 x 3/8-16 UNC; S:4.763 mm; PG:1/4 NPT; P120°:66.7 kN; L:419.1 mm; J min.:320.675 mm; P180°:72.5 kN; Ca:62.89 mm; Stabilizing ring:SR-22-19; Size (mm):1.772 Inch | 45 Millimeter x 1.969 Inch | 50 Millimeter x 0.807 Inch | 20.5 Millimeter ; |
| IKO CR18VR Cam Follower and Track Roller - Stud Type | B:14.00 mm; D:47.0000 mm; Basic Dynamic Radial Load Rating C:12700 N; Basic Static Radial Load Rating Co:3400 N; Grease Speed Rating n1:15000 rpm; d:20.000 mm; Oil Speed Rating n2:18000 rpm; Fillet Radius ra:1.00 mm; |
| IKO CF6VUUR Cam Follower and Track Roller - Stud Type | d1 ≈:33.74 mm; B4:5 mm; Hexagonal key size for grub screw N:3.175 mm; Recommended tightening torque for grub screw:4 N·m; Basic dynamic load rating C:14 kN; Fatigue load limit Pu:0.335 kN; D:52 mm; Basic static load rating C0:7.8 kN; Thread grub screw G2:1/4-28 UNF; r1,2 min.:0.6 mm; |
| 1 Inch | 25.4 Millimeter x 1.25 Inch | 31.75 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BAM168 Needle Non Thrust Roller Bearings | Mass bearing (including seat washer where applicable):45.5 kg; Fatigue load limit Pu:49 kN; Basic dynamic load rating C:475 kN; d:560 mm; H:67 mm; Limiting speed:800 r/min; Basic static load rating C0:3250 kN; Minimum load factor A:55; Da max.:607 mm; da min.:623 mm; Size (mm):1 Inch | 25.4 Millimeter x 1.25 Inch | 31.75 Millimeter x 0.5 Inch | 12.7 Millimeter ; |
| IKO CR18V Cam Follower and Track Roller - Stud Type | l2 max.:107 mm; Basic static load rating C0:42.5 kN; d:20 mm; l1 min.:43 mm; dk:29 mm; Material constant KM:330; l7 min.:24 mm; G:M 20x1.5; Mass rod end:0.32 kg; Specific dynamic load factor K:100 N/mm²; |
| 1.5 Inch | 38.1 Millimeter x 1.875 Inch | 47.625 Millimeter x 1.25 Inch | 31.75 Millimeter IKO YB2420 Needle Non Thrust Roller Bearings | C2:4.3 mm; Calculation factor f0:9.7; Preload class A GA:49 N; Reference grease quantity Gref:5.49 cm³; d:65 mm; Basic dynamic load rating C:19.9 kN; B:18 mm; Mass bearing:0.47 kg; Static axial stiffness, preload class C:85 N/µm; Static axial stiffness, preload class B:54 N/µm; Size (mm):1.5 Inch | 38.1 Millimeter x 1.875 Inch | 47.625 Millimeter x 1.25 Inch | 31.75 Millimeter ; |
| IKO CR36VBUUR Cam Follower and Track Roller - Stud Type | with cylindrical bore:800 min-1; rs (min):3 mm; Oil:268.390 kN; Pu:1690 kN; B:118 mm; D:360 mm; Grease:3060 kN; with tapered bore:1 000 min-1; Dynamic (Cr):6 mm; Static (Cor):11.1 mm; |
| IKO CF24VBUUR Cam Follower and Track Roller - Stud Type | Reference speed:500 r/min; Basic dynamic load rating C:2380 kN; Calculation factor kr:0.25; D:520 mm; Limiting speed:630 r/min; da min.:398 mm; r3,4 min.:4 mm; d:380 mm; rb max.:3 mm; ra max.:3 mm; |
| IKO CF10-1BUUM Cam Follower and Track Roller - Stud Type | Grease Speed Rating Open/Shielded n1:9000 rpm; d:20.000 mm; B:19.00 mm; D:72.0000 mm; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:11000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:18600 N; Basic Dynamic Radial Load Rating C:29200 N; |
| 0.394 Inch | 10 Millimeter x 0.551 Inch | 14 Millimeter x 0.472 Inch | 12 Millimeter IKO TLAM1012 Needle Non Thrust Roller Bearings | Da max.:502 mm; s1 max.:25 mm; Da min.:454 mm; Operating clearance factor k2:0.099; ra max.:4 mm; Reference speed:950 r/min; Limiting speed:1300 r/min; d:340 mm; Ca min.:2.1 mm; Mass bearing:98.2 kg; Size (mm):0.394 Inch | 10 Millimeter x 0.551 Inch | 14 Millimeter x 0.472 Inch | 12 Millimeter ; |
IKO NURT35-1 Cam Follower and Track Roller - Yoke Type Video